Two robots of machining center combine fluctuation to expect

  • Time:
  • Click:138
  • source:YIGAN CNC Machining
The material of fluctuation of machining center automation that heart of equestrian fourth grade provides for abroad client is unit, mix in the ground by installation respectively two robots finish aerial jointly. Frame in aerial robot, be in charge of taking, outfit clip, discharge, another installs the robot in the ground, the workpiece that is in charge of will been machine is carried send stock the storehouse inside. Milling unit of the client is comprised by 2 vertical machining center. Heart of equestrian fourth grade used robot of two FANUC M710iC. Hang installation to be in among them machining center upper part, pass aerial linear slippery course, this robot can be 2 machining center to expect up and down at the same time. Installation of another M710iC robot is in the ground, be in charge of carrying the work that already had processed, send work or material rest. Be aimed at the complexity of client work, the robot of heart of equestrian fourth grade is compositive the system of IRVISION 3D vision that used FANUC, use at detecting workpiece 3 dimension position, make sure workpiece of can accurate capture sends robot grasper the position of tool clamping apparatus of machining center thereby. At the same time of the ground carry a robot to guide a workpiece to put makings storehouse to appoint through visual system locally. Robot of FANUC M710iC industry, have the following characteristic: 1, can carry weight 70kg respectively, can amount to radius to all be 1900mm. 2, can undertake installing below aleatoric angle, if the ground is installed, hang setting, banking angle setting. 3, through combining visual sensor and force transducer, can use newest intelligent chemical industry to make. CNC Milling CNC Machining