EWAMATIC LINE of center of grinding of tool of numerical control of company of Yi Wa pattern

  • Time:
  • Click:148
  • source:YIGAN CNC Machining
The EWAMATIC LINE of center of grinding of numerical control tool of EWAG, can satisfy a client to need to the individuation of grinding of high quality tool, apply to production or blade to worry all sorts of cutting tool and bit. Si Laifu is faced (the Yiwage below Schleifring) group division (the EWAMATIC LINE of center of grinding of numerical control tool that EWAG) company rolls out, can satisfy a client to need to the individuation of grinding of high quality tool, apply to production or blade to worry all sorts of cutting tool and bit. No matter be material of hard alloy, PCD and the cutting tool that exceed hard PCBN data and razor blade, EWAMATIC can be machined, include grinding and electric corrode treatment, treatment precision amounts to ± 1.

5µm, what can gain lens face is bright and clean degree, the requirement that to high accuracy cutting tool and razor blade are produced and uses in order to satisfy a client. The shape of 6 horn star of EWAMATIC is treatment area on the right side of wheelhead wearing machine tool, include wheelhead wearing and workbench, the fluctuation makings device with left different configuration, to the circle workpiece can use simple linear manipulator, right bit or other the work that carries harder can use 4 axes robot to wait. Of EWAMATIC machine tool turn tower wheelhead is worn can install 6 grinding main shaft (most 12 emery wheel) or electric corrode annulus, 1µm of fixed position precision, can satisfy the overall demand that complex cutting tool produces. The machine tool uses system of NUM 1050 numerical control, match at the same time stock and survey the plant of emery wheel nap with compositive system. The wheelhead of this equipment is worn for shape of 6 horn star, wheelhead wearing deflexion is axis of numerical control A, its deflexion limits is - ° of 15 ° ~+25 (SK2000 wheelhead) , deflexion speed 2000 ° / Min; Workbench swings horn is axis of numerical control B, can be in 135 ° of ± the set inside limits, the biggest swing speed is 28800 ° / Min; Axis of numerical control C is the circumgyrate that workpiece head wears, the circumjacent grinding of interpolation of the graduation of cutting tool of the circle of in order to that finish, helix, razor blade, slewing speed is 90000 ° / Min; Below mode of outer round grinding, c axis but successive circumgyrate, rotate speed 800m/min. B axis and C axis roll introduce drive of direct electric machinery () of electric main shaft, resolution 0.

0001 ° . CNC Milling CNC Machining