Samage develops Germany to be able to shorten the MC of horizontal of 3 main shaft of handling time

  • Time:
  • Click:144
  • source:YIGAN CNC Machining
Graph the 1 horizontal MC that has 3 main shaft pursues 2 treatment are indoor: 3 main shaft from on the right side of at the same time cutting axis of 3 W of 3 work plan although W axis and A axis are runner shaft together, but the graduation that A axis uses at workpiece, w axis is in charge of rotational bracket orgnaization, make 2 workbench pursue to shift of airframe inside and outside 4 highlight the workpiece that come to be able to turn from airframe those who carry workbench " bracket orgnaization " , change as 2 type tray Ma Ge of Sa of device use Germany (SAMAG) development went to have the 3 main shaft, horizontal machining center that can process 3 work (MC) , be in what Han Nuowei of 23 days of Germany held 17 ～ in September 2007 " exhibition of European machine tool (EMO2007) " on showpiece (graph 1) . Because can process many work at the same time, because this can improve actual cutting efficiency, reduce total handling time. New product is on pillar with transverse arranged means to install 3 main shaft, deployed 3 to be in workbench a side " bracket orgnaization " the revolving stage that goes up to clip holds work and rotate (graph 2) . Workbench is located in on bracket orgnaization, the group in this workbench contains 3 revolving stage. Main shaft but the Z axis of the X axis of direction of edge airframe depth, Y axis of perpendicular direction, horizontal direction these 3 direction move, workbench matchs stock to be used at graduated A axis and rotate the C axis of workpiece. Accordingly, although have many main shaft, but still belong to 5 axle control MC on machine tool classification. Additional, as identical as A axis W was installed to rotate on the bracket orgnaization of workbench a side axis (graph 3) . Nevertheless, what differ with the A rod that is used at workpiece graduation angle to adjust is, w axis is used at changing tray. Its appearance just changes like 2 type tray device, if will be located in the workbench on a face of bracket orgnaization to take in,the machine tool is machined indoor, criterion another face is shown in airframe exterior (graph 4) . Use this, when machining solid to decide 3 workpiece on a workbench, can disassemble from another workbench the work that processes, hold the work before card is machined. The go into operation that can improve a machine tool so is led, shorten total handling time. Additional, implement automation to make these intend the work, still used " the robot is unit " . What have work by perpendicular much more articulatory robot is fixed reach disassemble exercise, strive to reduce artificial cost. CNC Milling CNC Machining